ALUMINIUM LOUVRE 155-E

Our 155-E louvre system is a non-retractable slatted louvre made from high-grade extruded aluminium, with a width of 155 mm. The 155-E louvre system is suited for all kinds of internal and external installations; horizontal, vertical, sloping, and upside down. 155-E louvres are tiltable, but can also be placed in a fixed position.

TECHINCAL INFORMATION ➔

RAL COLOURS ➔

ANODIZING COLOURS ➔

TECHNICAL INFORMATION

PROFILE OF 155-E LOUVRE

The front, the visible side, of the 155-E louvre has an almost flat shape, with an overlap, this louvre also interlocks which makes the 155-E louvre perfect for black-out systems. So when you are looking for a louvre that allows you to darken a room by daylight, the 155-E should be on your short list. The back of the blade is designed for optimal fixation of the clip that holds the slat.

155-E BOX LOUVRE

There is something special about the backside of the 155-E louvre. During extrusion, the back of the 155-E is equipped with an clipping mechanism, allowing the louvre to be closed with a cover resulting in the 155-E Box.

155-E LOUVRE SYSTEM

The following image shows a schematic representation of a 155-E louvre system. Such a system consists of at least two rack arms, and a number of louvres, blades.

155-E blades are moveable, and can be placed in any position from 0 to 90 degrees. Sunshield louvre systems can be installed horizontal, vertical, in any desired slope, and upside down.